To test voltage to the
fuel pump, clip positive lead to blue wire and negative lead to any
ground. Wiring harness plug can be located on the driver's side rear shock
tower.
The color of the wire going into the plug is blue. The
color of the wire coming out of the plug (going into the fuel pump) is black
with white stripe.
- Lift the carpet that covers the rear hatch area.
- Remove the rubber/felt noise deadener mat.
- You should be able to see the wires that run to the gas tank.
(insert pic of fuel pump plug location)
Questions? Comments? Send mail to:
reted@fc3spro.com
10/04/2003
