Before blaming the motor, check to see if the mist nozzle are clogged on the hood.  You can clear any obstruction in the nozzles by running a needle in the holes.  You can check to see if motor is dead by pulling one of the hoses going into the nozzles and confirming that no windshield washer fluid coming out.

The windshield mist motor is located at the bottom of the windshield washer fluid reservior located in the front passenger corner of the vehicle.  To access them, you need to remove the front passenger plastic inner wheel well liner.  Once the liner is remove, you'll see the motor and the resevior.  Replace the motor if necessary.

(I've had this fail on my '87 FC turbo.     -RETed)



Questions?  Comments?  Send mail to:  reted@fc3spro.com

01/30/2004