Brake pedal going to the floor is usually caused by the absence of brake fluid or lots of air in the brake system.  Normally, the brake fluid does not disappear, so a leak in the brake system is the culprit.  Check all the brake system components, and if there is not obvious leak, the brake master cylinder is the most likely source of the problem.
FC3S Pro:  Problems, Components - Brake Lines
FC3S Pro:  Problems, Components - Brake Master Cylinder

After replacing the component that caused the leak, make sure the brake system is properly bled.
FC3S Pro:  Problems, Components - Brakes, How to Bleed
FC3S Pro:  Problems, Components - Brake Fluid



Questions?  Comments?  Send mail to:  reted@fc3spro.com

10/16/2004